Pew Pew Holster

  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
Pew Pew Holster

Tap for gallery

$49.95

(Quantity discounts available)


Product Information
Specification
Quantity Discounts

Law Enforcement - Military - Jailers - Courthouses - Shooting Ranges - Gun Stores - Schools & Universities - Stores - Restaurants

Anywhere that requires or allows anyone to carry a pistol needs Pew Pew Holsters in their bathrooms and gym facilities!

If you carry a firearm every day, whether you are law enforcement or a private citizen, we all have one thing in common, we have to go to the bathroom (10-100 or 10-200) every now and then! It may be a humorous topic on one hand but a deadly serious issue as well.

We have a solution for this problem, the Pew Pew Holster. Permanently mounted on the bathroom stall divider or door, you can safely unholster your firearm and securely store it in our Holster until you are finished with your business. The Holster is designed to accept just about any Pocket, Sub Compact, Compact or Full Size/Duty pistol including semiautomatics and revolvers, with or without lights and/or optics.

You can visit the Pew Pew Holster website to read more: https://pewpewholster.com

Design

Our patented design is an evolution of ideas that is able to securely accept just about any pistol on the market, from pocket guns to full service pistols with lights and optics, our design will safely accept them all. For those that still prefer revolvers, most will fit as well. Right or left handed it will accept your pistol without swapping the firearm to your weak hand.

Construction

We built these to last! Made from American .060" thick steel right here in Texas this is a install and forget piece of equipment. Utilizing the very same milspec coating our military uses on their various gun mounts it will not damage firearm coatings and has a slightly rubberized finish that protects and helps hold the firearm securely. 

Strong magnets are installed and coated with the holster to help hold compact and subcompact firearms in place. 

We suggest mounting the assembly 36-38" from the floor, in the center of the toilet stall door. This does two things.

  1. Mounting it on the door ensures you are looking right at it when you go to open the door, don't be that person that leaves their firearm in the restroom!
  2. Centering it on the door enables equal access to right and left handed personnel withtout swapping the firearm to their weak hand to insert the firearm in our holster.

If you do not have stalls it can be mounted to any door or even a wall. You can install them on the side of the dividers in a full stall or a urinal.

We provide all stainless hardware to mount it to any standard 1" thick stall divider or door. If you need to mount it to a wall you will need drywall anchors and 1/4" screws accordingly.

While we provide stainless nyok nuts and use button head bolts that are harder to remove without an allen wrench, if you have these mounted in a public environment we suggesting buying Loctite Red 263 to secure the nuts and help prevent theft.

Options

Right now we have one option, a Duty Belt Hook. For those that prefer to remove your gun belt, we suggest unholstering your weapon and inserting it in the Pew Pew Holster then removing your gun belt and hanging it from the wide 'hook' below the holster. This enables precise muzzle discipline without your duty holster flopping around and pointing the barrel anywhere but down...where it should go in a tight environment. Our Hook is wide enough to safely hold all duty belts up to 2.5". (most are 1.50" to 1.75")

Installation

Installation is simple and we provide documents and videos with details but basically you will use the backing plate as a template and drill four 1/4" holes through the stall door/wall and simply insert the bolts with one flat washer from the outside then install the backing plate then outer shell a washer then a nylok nut and tighten. That's basically it!

PATENT PENDING

Product CodePPH0001
ManufacturerTexas Made Products
ConditionNew
Weight2lb
Width6″
Height6″
Depth3″

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


QuantityPrice per unit
1$49.95
5+$47.50
10+$44.95
20+$39.50

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top

©2019 Texas Made Products LLC - All rights reserved.

Patents Pending

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe

©2019 Texas Made Products LLC - All rights reserved.

Patents Pending

eCommerce by CubeCart